Front axle lower diff mount welded

I managed to squeeze once again a short while to work at garage. Today’s effort was to weld the lower diff mount to the axle lower beam:


Even it sounds quite quick task it takes some time to get is just correct place and make sure the diff will align properly. Also dismantling the wheel mounts from the axle frame takes some time and after welding assembling it back together:

IMG_20141013_203041Next I will create diff center mounts and perhaps after that comes the floating mechanism. The upper beams of the front axle can only be created after the floating mechanism and front piece of the tractor chassis frame are ready to make sure there will be enough room for the axle to float properly.