Everything that can be bolted away has been bolted away

Current situation:

20140706_145057 20140706_145129 20140706_145201

But before that I made some tests about the final installation angle:

20140706_132919 20140706_132849 20140706_132821The reason why I might install the chassis back at rear-up angle is that I want to utilize the height of the windscreen better. Usually tractors & other machines have rather tall windscreen for better visibility, and most probably so shall also my tractor have. 😉

There are some little things like doors that will be “at interesting angle”, but based on quick tests they are working good enough way. Tailgate I have planned to install about 90 degree angle looking from the ground level. That should be fairly easy modification since I will chop about 0,5 – 1 meter out from interior length. So the tailgate will be immediately after the front doors.