Maybe not ready yet, but definitely getting there:

Those marks left by tape I will leave as they are for now. I will apply one layer of clear coat on the top of those and that’s it. It will be good enough solution. Let’s see if those bother me at the future or not, but since this is not a new or totally rebuilt camping trailer it don’t need to be perfect and some marks from the past can and will be there.

I will still apply some polyurethane foam spray to seal up certain things. Also window seals need to be improved a bit with some proper UV resistant mounting glue. The same glue I probably will apply to the outside corner seals since they tend to be leaky at some cases.

But hopefully soon I can start mounting seats and tables back like they were before. Other improvements to the audio system (and possible also video) I will make when other normal things are in. Same applies also to improving the electrical system in general.

Here is one picture of the front wall situation at the moment since I added this small piece of wood which will connect the side seats to the front wall:

This front wall backrest area I will apply the second layer of clear coat some near future.