“A small lorry that was a bit bad shape…”
From Scrap Heap Rider, posted by Sami Sipponen on 7/21/2013 (78 items)
- Piece of shit.
- Some cuts later…
- Small piece of steel welded. To be continue tomorrow evening.
- I could not resist to do a quick grinding… Better grinding will be done later, but …
- Some fresh steel and welds. Still plenty of rust to be fixed. This will continue tomo…
- Some fresh steel and welds. Still plenty of rust to be fixed. This will continue tomo…
- Slightly different angle of today’s work.
- Work continues…
- Some progress… Driver’s side will be ready today.
- Some progress… Driver’s side will be ready today.
- Today’s work done. Once again this will continue tomorrow…
- Today’s work done. Once again this will continue tomorrow…
- Rust and shit. Shit and rust. Dammit.
- The Flintstones model.
- The Flintstones model.
- The Flintstones undone.
- Today’s last piece.
- Today’s last piece.
- No more gentlemen vegetable wash while driving at rain. 😉
- Right back corner and back door ready.
- Fixing right front wheel arc.
- To be continue tomorrow… Then crew cabin should be finished.
- Back door step
- And here we go again…
- Rain delay… One piece still missing. Hopefully during weekend…
- Two lower latch needed fix…
- Ugly betty.
- One latch fixed.
- Some luxury parts will be installed… Like central locking. 😉
- It’s done. Crew cabin is finally solid. A bit wavy but still… 🙂
- Right door handle mounts upgraded.
- One latch counterpart were missing, but not anymore…
- Another latch fixed, maybe not the prettiest fix, but surely it works like it should …
- Right front step fixed.
- Platform edge hinges need to be strenghtened, so I cut 22 pieces 120x60mm of 2,5mm st…
- I moved the engine heater socket from front to back of the cabin to make the front lo…
- Right front door central locking motor installed.
- Every door lock mechanism need to be modified to work with smaller force… At origin…
- Couple of kick sled runners and 1m of 50x5mm aluminium rod… These will be turned to…
- No more gentlemen vegetable wash while driving at rain. 😉
- Some small progress also today…
- Rust is disappearing almost every day.
- Rust is disappearing almost every day.
- I created better door handle montings and my friend started with paintings.
- Today’s work started.
- Not that much visible progress today… All those shapes take time to create.
- Not that much visible progress today… All those shapes take time to create.
- Not that much visible progress today… All those shapes take time to create.
- Door handle mounts for right side doors waiting to be welded at the evening.
- Right back corner and back door ready.
- Right back corner and back door ready.
- Preparations started for the evening activities… I welded those two kick sled rocke…
- Locking mechanism installed.
- Only one lock needed to lock all the lower hatches.
- Backdoor central locking cables routed towards the alarm system head unit.
- Front door central locking cables. It took quite much time to do the first door and r…
- My friend got happy enough with applying the filler and grinding so he applied the pr…
- Some shopping today… Real work continues tomorrow.
- Cheap "stereo" speaker box from Motonet which will be divided to two.
- Speakers separated.
- Speakers separated.
- Battery box is much cleaner now.
- I routed poorly installed wires a bit better… So now it should look a bit more prof…
- New fuse box installed (left) and as you can see there are no wires at the floor anym…
- My friend and my dad installed reinforcing plates to platform edge hinges.
- All reinforcing plates installed, 130 holes drilled and as many studs popped to the h…
- Final look of the speakers before the installation.
- Just testing possible way to mount additional long beam lights and outline lights.
- I welded old radioantenna hole. Actually somebody had mounted an ornimental antenna t…
- I did some electricial work at weekend, like installed double door swithes to all doo…
- Skeleton needed a little patch… There could be a need for anothers as well but thos…
- Patch welded and grinded.
- New radioantenna installed to a new location.
- My friend grinded the rest rusts away and painted those at the right front corner.
- Also this little patch got some paint.
- Wiring needs still work and the final installation will also need some adjustments……
- Voltage meter and a new car radio was installed today.
- Preparing some of the additional lights.
Generated by Facebook Photo Fetcher 2